Under
Floor Heating
 | HeatSafe
Floor Heating System
The HeatSafe self regulating heating
cable can be used with all floor coverings including ceramic tiled floors, wooden
floors, vinyl tiled floors and even carpeted floors. By installing a self regulating
heating cable, that varies its output relative to the floor temperature, it is
possible to achieve an even heat distribution |
without
localised overheating.These products are ideal for wooden floor constructions,
heat sensitive floor coverings or for use with our ComfyFloor Acoustic Floating
Floor.
HeatSafe
Easy to Install
HeatSafe heating cable may be embedded
30 - 50mm below the surface of the concrete floor slab in, for example, new build
constructions, but more often is applied to the top of wooden or concrete floors
in both new build and retrofit/renovation constructions. |  |
Why
Choose Self Regulating Cables?
|
- Inherently Safe – Cannot overheat
or burnout!
- Energy Efficient
- Simple
to Install
- Cut to length cable
- Simple
and Reliable
|
HOW
TO SELECT & INSTALL THE HEATSAFE SYSTEM
- Measure the
area required to be heated allowing for obstructions such as kitchen units, Bath,WC.
- Select
the watts/m2 required from the table shown.
- Lay fixings provided dependent
upon floor construction (full detailed instructions contained
within each
pack). - Select appropriate position for the controller. Please note the
controller has a switching limit of 3600 watts, therefore areas requiring multiple
packs will need a contactor supplied and fitted by a qualified person as the total
heating load exceeds what the controller can switch.
- Lay cable and loop
back and forth at the required pitch.
- For tiled floors cover cable with
one layer of flexible tile adhesive or self levelling compound.
- Please
note that the controller has a switching limit of 3600 watts, therefore areas
requiring multiple packs will need a contactor supplied and fitted by a qualified
person if the total heating load exceeds the switch capacity of the controller.
- We
recommend the use of RCCD/MCB protection with all the underfloor heating systems.
- Insulation
-Warmfloor Solutions promotes energy efficiency.We recommend all floor bases are
installed with suitable insulation.
|
|
|
|
